Hard protective coatings, e.g. on cutting tools, should be both hard and tough. Superlattice films, multilayers of two alternating coherent materials with a period of a few nanometres, can reach hardness values up to twice those of their constituents, and they also show an enhanced fracture toughness with a similar dependence on the layer thickness. At such small length scales, the interfaces become the dominant building blocks of the material. The project studied how the superlattice architecture, the structure and composition of the interfaces, and impurities at the interfaces influence the mechanical properties, using model superlattices such as TiN/CrN, TiN/WN, TiN/(Cr,Al)N and CrN/AlN.
Our group contributed the atomistic modelling. Density functional theory was used to calculate elastic constants, tensile and shear strength and fracture toughness of the superlattices at and near the interfaces, in order to identify the weakest link of the coating, including the role of the magnetic state of CrN. Classical molecular dynamics was used for simulated tensile and nanoindentation tests of TiN/AlN multilayers, for dislocation core energies in TiN and AlN, and, together with DFT, for the temperature dependence of the elastic properties, surface energies and fracture toughness of TiN. The films were synthesised and tested by micromechanical experiments (micro-cantilever bending, micropillar compression, in-situ high-temperature tests) at TU Wien, and continuum-mechanics models linked the atomistic results with the crack growth behaviour of the superlattices.
For CrN/TiN and CrN/AlN superlattices we showed that explicitly modelling the interfaces is important, although the much cheaper continuum-mechanics approach of Grimsditch and Nizzoli often gives sufficiently accurate elastic properties. The cleavage strength correlates with the interplanar spacing, but not with the magnetic moments of the individual CrN planes; the interlayer distance oscillations, which appear mostly in the metallic TiN and CrN layers, are linked to interface-induced Friedel charge oscillations. Combining ab initio and classical molecular dynamics with nanoindentation and electron microscopy revealed the atomistic mechanisms of plasticity and crack growth in AlN/TiN superlattices: loaded perpendicular to the interfaces they show little plasticity and cleave parallel to the layers, whereas in-plane loading activates phase transformations in AlN that strongly enhance the toughness. MD simulations also showed that the stresses under a nanoindenter are high enough to intermix TiN/AlN multilayers into a metastable solid solution, as observed experimentally. The temperature-dependent surface energies and elastic constants of TiN, predicted here for the first time, give a fracture toughness that decreases only weakly with temperature but depends strongly on the crack plane, being lowest for (100) and highest for (111) surfaces.
Lukas Löfler, Thomas Leiner, David Holec
Austrian Science Fund (FWF), project P 30341-N36.